Steps to Reset 2018-2024 Mazda CX-9 TPMS
Step 1: Check and Adjust Your Tire Pressure
The 2023 Mazda CX-9 does not have a tire pressure reset button. So, it’s important to know how to reset your tire pressure warning light! On your driver’s side door there is a yellow sticker in the door jamb. Set all 4 tires to the exact pressure levels on the sticker. Remember to adjust the tire pressure only when the tires are cold. (this means before driving long distances) Check out the graph below and match your CX-9 model tires to its recommended pressure.
Step 2: Drive Your Car
After adjusting your tire pressures to the cold recommended pressure, drive the car. Mazda says you need to drive the car for at least 3 minutes at speeds of at least 16 Mph. After driving the vehicle, the tire pressure light will go off. In my experience, the tire light has taken up to 15 minutes of driving to finally go off. Be patient!
Step 3: Re-Check Your Tire Pressure
If the tire pressure light doesn’t go off after step 1 and step 2, recheck your tire pressure. Confirm that the pressure is still at the exact pressure you set it to. If it’s not, you likely have a tire leak or some sort of puncture. If the tire light goes off and then comes back on, you definitely have a tire leak.
These steps work for all CX-9 Models including: CX-9 Touring, CX-9 Touring Plus, CX-9 Carbon Edition, CX-9 Grand Touring, CX-9 Signature.
Steps to Reset 2013-2017 Mazda CX-9 TPMS
If your Mazda CX-9 Does not have the reset button, follow the procedure above.
Adjust all 4 tires to the recommended levels.
Turn the ignition switch to the “ON” position or with the car running.
Press and hold the tire pressure monitoring system (TPMS) button until the TPMS indicator light in the instrument cluster flashes twice.
Release the TPMS button. The TPMS indicator light will turn off.
Drive the vehicle at speeds above 16 mph (25 km/h) for at least 10 minutes.
TIP: If the tire pressure light won’t go off after following these steps, double check your air pressure manually with a tire gauge and then repeat the reset procedure. (tire pressure gauge we recommend at the bottom of this page)
MAzda CX-9 With a TPMS Button
Mazda CX-9 TPMS Malfunction Indicator
Your Mazda CX-9 comes with a TPMS malfunction indicator, which alerts you if the system itself isn’t functioning properly . This indicator works alongside the low tire pressure warning light. If the tire monitoring system experiences an issue, the warning light will flash for around one minute before staying lit continuously. This pattern will repeat each time the vehicle starts until the issue is resolved. When the malfunction indicator is lit, the system might not be able to detect or signal low tire pressure as designed.
Basically, your tire pressure monitoring system won’t work correctly until the problem with the TPMS is resolved. In other words, if you have a blinking tire pressure light, you have a problem with the TPMS system itself, not an air pressure problem. So, if you have a dead tire pressure sensor, your TPMS will malfunction.
Always Reset TPMS in these Cases:
After tire pressure has been adjusted.
After a pressure sensor has been replaced.
After tire rotation has been performed.
After tire balances or wheel alignments.
After any tire or wheel has been replaced. Or removed and put back on.
After when the vehicle battery dies, been drained, or jumped.
After the TPMS light turns on.
How the Mazda CX-9 TPMS Works
Pressure Sensors in Tires: Each tire has its own pressure sensor that continuously checks the air pressure inside the tire.
Data Transfer: These pressure sensors send real-time tire pressure information wirelessly to the car’s computer via radio frequency.
Sensor Battery Life: Pressure sensors run on basic wrist watch batteries that typically last for several years (around 5 to 7 years). They are not replaceable. You must replace the entire sensor when the battery dies.
Vehicle Startup: When you start your CX-9, the TPMS automatically activates and starts collecting data from the tire pressure sensors.
Continuous monitoring: The system constantly checks tire pressure, making sure it stays within the recommended limits.
Warning thresholds: The TPMS has predefined pressure thresholds for each tire.
Pressure Changes: If tire pressure goes beyond the established thresholds (either too high or too low), the TPMS sets off a warning light and noise.
Warning light activation: If there’s an issue with tire pressure, the TPMS lights up a warning signal on the dashboard to notify the driver.
Error codes: As well as the warning light, the TPMS may also give error codes or specific details about which sensor has problems if scanned with a TPMS diagnostic tool.
What Causes the Tire Light to Turn On?
Low tire pressure: The most common cause, when one or more tires are underinflated, falling below the manufacturer’s recommended pressure level.
Overinflated tires: If a tire is inflated beyond the recommended pressure, the can sometimes cause the tire light to turn on.
Seasonal temperature changes: When the temperature drops, tire pressure decreases in tires.
Wheel without sensor: Most donuts and spare tires do not have pressure sensors.
Snow and Ice: Excess amounts of snow or ice around the wheels or valves
Sensor malfunction: A faulty tire pressure sensor may provide inaccurate readings, triggering the warning light.
TPMS battery issues: A low or dead battery in a tire pressure sensor will cause the system to activate a TPMS malfunction light explained above.
TPMS malfunction: An issue with the TPMS receiver module will also cause the malfunction indicator.
Radio Interference: Radio frequency interference from devices inside the vehicle or outside the vehicle. (example: alarm systems or cellular towers can occasionally set off TPMS when driving by)
How Weather Affects Tire Pressure
During colder seasons, the ambient temperature drops, causing tire temperatures to decrease as well. As tire temperature falls, air pressure also reduces. Consequently, the TPMS warning light might turn on more often. The chart above illustrates the relationship between air temperature and tire pressure changes in both Fahrenheit and Celsius, as well as PSI and kPa units. The baseline temperature for checking tire pressure is considered to be around 62°F (16.7°C), where no real tire pressure changes will occur. Basically, for every 10 degree Fahrenheit drop in air temperature, about 1 Psi air pressure will decrease.
Benefits of TPMS in Mazda CX-9
Enhanced safety: Monitors tire pressure to help prevent blowouts or accidents caused by underinflated or overinflated tires
Improved fuel efficiency: Properly inflated tires reduce rolling resistance, increasing fuel economy
Extended tire life: Maintaining optimal tire pressure helps reduce uneven wear and prolongs tire lifespan
Better handling and performance: Optimal tire pressure ensures consistent and reliable vehicle handling
Reduced CO2 emissions: Improved fuel efficiency contributes to lower greenhouse gas emissions
Cost savings: Longer-lasting tires and better fuel economy can save money over time
Increased braking efficiency: Proper tire pressure provides better contact with the road, improving braking performance
Greater ride comfort: Adequately inflated tires provide a smoother driving experience
Early warning system: Alerts the driver to potential tire issues before they become critical
Maintenance reminder: Encourages regular tire pressure checks and maintenance, ensuring safe driving conditions
Peace of mind: Drivers can trust that their vehicle is continuously monitoring tire pressure for their safety and comfort
Conclusion
Resetting the tire pressure warning light on a 2023 Mazda CX-9 is an easy process that can be done in just a few steps. By following all the steps detailed in this article, you can guarantee that your tire pressure monitoring system operates precisely, and your Mazda CX-9 performs at its best.
Please note that this blog post contains Amazon affiliate links. This means that if you make a purchase through one of these links, the author of the blog may earn a small commission at no extra cost to you. The author only recommends products that they personally use and believe in. Thank you for supporting this blog.