STEPS TO RESTART TIRE PRESSURE MONITOR
STEP 1: Turn the vehicle to the ON position, or have the vehicle running, engine on.
STEP 2: Use the arrows on the left side of the steering wheel and scroll Right.
STEP 3: Scroll over and Select SERVICE.
STEP 4: Select TIRE PRESSURE.
STEP 5: Screen will say “Tire pressure will be displayed after driving a few minutes”, Use the DOWN arrow on steering wheel and scroll down.
STEP 6: Select OK on steering wheel.
Screen will read “Tire Press. Monitor Restarted”
The tire pressure will display after a few minutes of driving.
TIRE PRESSURE MONITOR DESCRIPTION
The 2013 Mercedes ML tire pressure monitor detects pressure loss in one or more tires. When the pressure loss is detected, a warning message on the vehicle’s display will appear as well as a warning sound. After following the TPMS reset procedure, the tire pressure warning message being displayed on the vehicle’s display will be deleted. (article on how TPMS works) Mercedes claims that when tire pressure values are adjusted, the display will detect the tire pressure values. I suggest restarting the TPMS every time you adjust the tire pressure values on the vehicle and to always adjust them when the tires are cold. (article on adjusting tire pressure)
WHEN TO PERFORM TIRE PRESSURE RESTART
–>After adjusting tire pressure. (best tire pressure gauge on Amazon)
–>After tire replacement. (best cordless impact wrench for removing tires)
–>After tire rotation. (if the tires are rotated and not reset, the tire pressures may be displayed on the vehicle’s display in the wrong locations) (article on best cordless tire inflators)
